The CPU-301-16 is an ultra low power, flexible CoM/SBC based on NXP i.MX6 that can be suitable as embedded platform for a wide range of applications, such as retail kiosk displays, medical equipment, and control panels for fitness equipment.
Delivering a full range of capabilities in a low-power and compact design, the CPU-301-16 is the embedded platform of choice for a wide range of applications, such as retail kiosk displays, medical equipment, and control panels for fitness equipment.
The CPU-301-16 uses leading-edge NXP i.MX6 technology to deliver significant functionality into a form factor that allows for efficient packaging and design. Being extremely power efficient, the CPU-301-16 greatly simplifies heat management, allowing fanless designs for most applications.
The CPU-301-16 is available in two versions: as a stand-alone Single Board Computer (no need for a carrier board: just add a power source, the cables and an enclosure to make a smart device) and as a traditional Computer on Module, where the native interfaces are exposed and expanded through a carrier board.
The board support package (BSP) from Eurotech enables the capabilities of the i.MX6 processor, providing an application-ready embedded platform that makes it easy to exploit the full feature set of the module. The CPU-301-16 extends the Eurotech family of products that make IoT applications possible.
With Everyware Software Framework (ESF) and the Everyware Cloud Client loaded on the CPU-301-16, any device using this platform is Everyware Cloud-enabled and ready to be part of the Internet of Things. To learn how the CPU-301-16 can speed time to market and simplify development for sophisticated devices, contact the Eurotech sales team to order a development kit.
|PROCESSOR||CPU||NXP i.MX6Solo (Single Core ARM Cortex-A9, up to 1.0 GHz) – NXP i.MX6DualLite (Dual Core ARM Cortex-A9, up to 1.0GHz) – NXP i.MX6Dual (Dual Core ARM Cortex-A9, up to 1.2GHz) – NXP i.MX6Quad (Quad Core ARM Cortex-A9, up to 1.2GHz)|
|MEMORY||RAM||Up to 4GB DDR3L Soldered-down|
|STORAGE||Embedded||Up to 64GB eMMC Soldered-down|
|SATA||1x SATA 2.0 (i.MX6Dual and i.MX6Quad Only)|
|Other||On Board Flash Expansion: 1x microSD slot, up to 64GB – Off Board Flash Expansion: 8bit SD port|
|STAND ALONE SBC I/O INTERFACES||Ethernet||1x 10/100/1000Mbps, with Integrated PHY|
|USB||1x USB 2.0, OTG|
|Serial||1x RS-232 (2 wire)|
|Digital I/O||5x GPIO, 3.3V|
|CoM MODE I/O INTERFACES||Ethernet||1x 10/100/1000Mbps with Integrated PHY, IEEE1588 Support|
|USB||2x USB 2.0 (1x Host, 1x OTG)|
|CAN bus||2x CAN bus 2.0|
|Digital I/O||21x GPIO, 3.3V (with support for an 8x8 keyboard matrix)|
|Video||2x LVDS, 1x RGB, 1x HDMI – Camera Interfaces: MIPI Camera, CMOS Camera (Optional)|
|Audio||S/PDIF Audio CODEC Interface|
|PCI Express||1x PCIe x1|
|I2C||2x I2C bus|
|SPI||2x SPI bus|
|Consumption||1-2W Typ. (5W Max)|
|Management||Eurotech Power Management: Sleep/Run/Selective Power Down/Scaling|
|ENVIRONMENT||Operating Temp||Extended: - 40 to +85°C – Commercial: 0 to +70°C|
|Storage Temp||- 40 to +85°C|
|CoM Connector||2x Tyco Series, 220 Pin|
|SOFTWARE||OS||Support for Linux Windows Embedded Compact 7|