The Advme1311 is a VME digital output board that provides a 64-point output which is divided in eight channels. Each channel has a common and can handle digital signals using different power sources.
Isolation:
Photo-coupler isolation is provided between output channels and between each output channel and the VME bus.
Other features:
A switch on the front panel allows to display by LEDs one of the eight outputs. Device driver for VxWorks® is optionally available.
Architecture:
Digital Output:
- Number of Channels: 64 (8 channels per common x8)
- Output voltage tolerance: up to 50V DC
- Load current: up to 200mA
- Output connector: two MIL-type 40-pin headers
Isolation:
- Isolation method: photo-coupler isolation
- Withstanding voltage between output and system: 1500V AC for one minute
- Withstanding voltage between output and channels: 1500V AC for one minute
Bus Interface:
- VME bus
- Width complies with A16 D16/D08(EO) Rev.C.3
- Accessible using AM codes 29H and 2DH
Power Supply:
Power Consumption:
Mechanical:
- Dimensions: 6U – 262 x 172 mm (10.31” x 6.77”)
- Pitch: Single slot – 20.02 mm (0.79”)
- Weight: 330g
Operating Systems Supported:
Options:
- Device driver for VxWorks®