AI Powered People CounterITxPT, AI Classification, 3D ToF, Video
The DynaPCN 10-30 is a rugged People Counter certified for Public Transportation, Road Vehicles and Rolling Stock that adds advanced AI capabilities to the traditional people counting function.
- AI-based Classification
- Drop-in Replacement for Previous Generation
- Easy Installation
- ITxPT Ready
- Automotive and Rolling Stock certifications
- Open Platform
Operating Temperature: -40 to +85°C
The DynaPCN 10-30 is a rugged People Counter certified for Public Transport, Road Vehicles and Rolling Stock that adds advanced AI capabilities to traditional people counting function.
The powerful AI engine that comes with the DynaPCN 10-30 provides adult vs child out-of-the-box capabilities and can optionally support additional classification models to enable the recognition of bicycles, strollers, wheelchairs; additional ad-hoc classification models can be developed as a Professional Service.
The DynaPCN 10-30 offers a simple and efficient opportunity to adopt or migrate to the most advanced requirements: for new deployments, it provides a smooth path towards ITxPT, while for existing fleets, it brings the latest capabilities while keeping a full Form-Fit-Function compatibility with Eurotech previous generation People/Passenger counters, including the ones based on serial communication.
Thanks to a smart autotuning function, the DynaPCN 10-30 dramatically improves the configuration time, completely removing the guesswork that is typically required to reach the optimal performance in a real-world deployment; the physical installation time is also very fast, thanks to an improved mechanical design that positions the connector in an installer-friendly location and that offers a range of options for cabling, from rugged low-cost DB15 up to ITxPT M12
The DynaPCN 10-30 also provides a high level of tamper resistance with an innovative design that eliminates the need for a service panel (in some SKUs), removing a critical attack point and delivering at the same time a superior aesthetic experience.
|Ordering code: DYPCN-10-30-XX|
|VISION||3D Camera||Time of Flight, QVGA @30fps Resolution, 850mm Wavelength|
|2D Camera||RGB, 2Mp Resolution|
|AI CLASSIFICATORS||Classes||Adult vs Child; Wheelchair, Bicycles and Strollers (Factory Option)|
|Event Recording||Factory Option|
|I/O INTERFACES||Ethernet||No||1x 10/100Mbps|
|Serial||1x RS-485 Isolated||No||1x RS-485 Isolated||No|
|Digital I/O||1x Input (24VDC Optoisolated)|
|CYBERSECURITY (HARDWARE)||TPM||TPM 2.0|
|Service Panel||Yes, Magnetic Cover||No Service Panel|
|OTHER||RTC||Yes, with SuperCAP (up to 15 Days Retention)|
|Watchdog||Yes - Dedicated Chip|
|Sensors||3D Accelerometer, 3D Gyroscope, Microphone, Temperature, Humidity|
|LED||1x System, 1x Debug|
|CONNECTORS||System Connector||1x DB15HD|
|POWER||Input||6-60VDC (24 and 48VDC Nom) Surge, Noise, Rev Polarity, Overvoltage & Short Protection, Load Dump||PoE+|
|Power Backup||10s Hold-up After Power Failure (Safe-shutdown) Configurable Sleep Timer, to Manage Shutdown|
|Consumption||<10W Typical (15W Max.)||<10W Typical (13W Max.)|
|ENVIRONMENT||Operating Temperature||-40 to +70°C TX/OT4 According to EN50155|
|Storage Temperature||-40 to +85°C|
|Humidity||5 to 95% Relative Humidity (Non-condensing) at +40°C|
|CERTIFICATIONS||Regulatory||UE/UK: CE, UKCA; North America: FCC, ISED|
|Safety||EN 62368, UL 60950 (§)|
|Rolling Stock||EN50155, EN45545|
|Automotive||E-Mark R10, ITxPT Ready|
|MECHANICAL||Enclosure||Material: Aluminum – Magnesium Alloy|
|Dimensions||Frame: 100x230x3mm (Height x Width x Thickness); Cut-Out: from 82x209x42mm (Height x Width x Depth, Frame at 0°) to 82x209x70mm (Height x Width x Depth, Frame at 45°); Mechanically Compatible with Eurotech People Counters|
|Installation Height||1.9m Min., 2.5m Max.|
|Detection Width||1.6m Min., 2.5m Max.|
§ UL, NRTL listing Factory Option.
The DynaPCN 10-30 has a DB15HD connector on the rear side for power supply and data connection. There are three ways to connect the DynaPCN 10-30:
- Direct connection to the DB15HD connector
- Using the bundles that include a Connector Box.
A connector Box is an accessory attached on the rear side of the DynaPCN 10-30 that makes it a Form Fit Function (FFF) replacement for DYPCN-10-20-xx, PCN-1000, and PCN-1001:
|DynaPCN 10-30 + Connector Box|
|Ordering Codes||DYPCN-10-30-21||DYPCN-10-30-01 + Connector Box (Type A)||FFF for PCN-1000 and PCN-1001|
|DYPCN-10-30-22||DYPCN-10-30-02 + Connector Box (Type B)||FFF for DYPCN-10-20-xx|
|DYPCN-10-30-23||DYPCN-10-30-03 + Connector Box (Type B)||FFF for DYPCN-10-20-xx|
|DYPCN-10-30-32||DYPCN-10-30-12 + Connector Box (Type B)||FFF for DYPCN-10-20-xx|
- Using the cable-adapters that can be attached on the DB15HD connector:
|Ordering Code||Contact Eurotech||1x DB15HD to 1x M12 ITxPT|
|Contact Eurotech||1x DB15HD to 1x M12 Eurotech DynaPCN 10-20-xx|
|Contact Eurotech||1x DB15HD to Other Style (Factory Option)|