The Advme1537 board is a DeviceNet/CAN Board equipped with SH7055F™.
When used together with other VME bus master boards it can operate as follows:
1 DeviceNet master board
As an intelligent slave type DeviceNet master board.
2 DeviceNet slave board
As an intelligent slave type DeviceNet slave board.
3 CAN board
As an intelligent slave type CAN board.
Device driver for VxWorks support
Device drivers provided to enable use as 1 to 3 above. (paid option)
Pre-installed firmware
Firmware is pre-installed on the SH7055F™ side to enable operation as an intelligent type DeviceNet (master/slave) or CAN board.
Standard-equipped with a T4th monitor
Standard-equipped with a remote debugger (T4th) to provide support for user development of application programs on the SH7055F™ side. It is equipped with a tool for writing developed application programs to the flash memory of the SH7055F™.

Architecture:

• VME compliant

CPU:

• SH7055F™ (40MHz)
• Built-in 32-bit FPU, 52MIPS

Memory:

• 128KB and 32KB(built-in SH7055F™ ) SRAM
• 128KB EPROM
• 512KB(built-in SH7055F™ ) FLASH Memory

DeviceNet/CAN:

• One port (HCAN 2ch)

Serial Ports:

• RS-232C
• Two-channel (Dsub 9-pin)

Bus:

• VME bus
• Width complies with A24/A16 D16/D08(EO)
• Function: Master/Slave

Mechanical:

• Dimensions: 6U – 262 x 172 mm (10.31” x 6.77”)
• Pitch: Single slot – 20.02 mm (0.79”)

Operating Systems Supported:

• VxWorks®