The A3pci1534 is a DeviceNet/CAN Board that can be used as follows:
1) As a DeviceNet Master Board: functions as an intelligent slave type DeviceNet master board.
2) As a DeviceNet Slave Board: functions as an intelligent slave type DeviceNet slave board.
3) As a CAN Board: functions as an intelligent slave type CAN board.
Other Features
Firmware is pre-installed on the SH7055F™ side to enable operation as an intelligent type DeviceNet (master/slave) or CAN board.
Device driver support for Windows NT4.0® and VxWorks®.
Device drivers provided to enable use as 1 to 3 above available as paid option.

Architecture:

• CompactPCI

CAN Controller:

• Hitachi® SH7055F™
• Number of channels: 2
• Transmission speed: up to 1Mbps (125, 250 or 500kbps when using DeviceNet)
• Memory: 64KB dual-port RAM
• Firmware: CAN/DeviceNet: Master/DeviceNet: Slave

Bus:

• CompactPCI
• Bus width: 32bit
• Data speed: 33MHz
• Space required: contiguous 64kB in PCI memory space
• Interrupt line: INTA

Power Supply:

• Single +5V DC

Mechanical:

• Dimension: 3U – 100 x 160 mm (3.94” x 6.30”)
• Pitch: Single Slot – 20.02 mm (0.79”)

Operating Systems Supported:

• VxWorks®, Windows NT®, Windows 2000®, Windows XP®

Options:

• Device drivers provided to enable use as DeviceNet (master/slave) or CAN board.