Advme7509 is a single-slot 6U VME board utilizing a PowerPC® 750FX™ processor. The board can be used as a system controller to meet high performance system requirements. The external VME bus is accessible via the on-board “NARUTO II” PCI-VME bridge.
Interfaces:
The front panel includes 2ch of 10/100BASE-TX Ethernet ports and 4ch RS232 serial ports.
Memory:
A variety of memories including SDRAM (up to 512MB), CompactFlash, FlashROM, SRAM, and EEPROM are available.
Architecture:
CPU:
- IBM PowerPC® 750FX™ (600MHz)
- L1 cache: 32KB/32KB, L2 cache: 512KB with parity
Memory:
- 256-512MB SDRAM (supports EC/ECC functions)
- 512KB Boot ROM Flash Memory (accommodating Advanet’s T4th boot loader)
- 512KB SRAM for backup
- 256 Bytes Serial EEPROM
- CompactFlash socket supporting Type I and Type II
System Controller:
PCI-VME Bridge:
PMC Slot:
- Standard: IEEE 1386.1
- One slot
- Power Supply: +5V, +3.3V, +12V, -12V DC
- 32/64 bit
Watchdog Timer:
Real Time Clock:
Front Panel:
- 4x RS-232C (using RJ-45 connectors)
- 2x 10/100 BASE-TX (using RJ-45 connectors)
Bus:
- VME bus
- Width complies with A32/A24/A16 D32/D24/D16
- Functions: master/slave, system controller, interrupter, interrupt handler, system reset input/output
RoHS:
Power Supply:
Power Consumption:
- 32.5W max (excluding PMC)
Mechanical:
- Dimensions: 6U – 160 x 233.35 mm (6.30” x 9.19”)
- Pitch: Single slot – 20.02 mm (0.79”)
- Weight: 330g
Operating temperature:
Humidity:
Operating Systems Supported: