The A6pci8018 is a Compact PCI bus CPU board provided with Intel’s latest mobile processor, the Intel® Pentium M™ processor Low Voltage 738 (1.4 GHz operating frequency).
CPU
The Intel® Pentium M™ processor Low Voltage 738 is engineered and manufactured with the latest 90mm processor architecture, and its thermal-designed power is kept to 10W when running at 1.4 GHz, which about half that of previous chips. Building on this feature, and with its single-slot width board size, the Adpci 8018 has a universal mode board and can be used in either slot of system or peripheral devices.
Adpci 8018 works as the CompactPCI central CPU but it can be used also in multiple boards configurations for distributed or multiplexed CPU processing.
Architecture:
CPU
- Low-voltage Intel® Pentium M™ processor 738 1.4GHz
Memory:
- DDR2 SDRAM PC2700: 512MB on-board installation with ECC support
- CompactFLASH: CF+ and specification Rev.2.1, supports multiword DMA, OS bootable.
Bridge:
- PLX PCI6254™
- Functions: Dedicated system slot transparent bridge, dedicated peripheral slot non-transparent bridge, provides board reset function (PRST# signal) and monitor facility (DEG#, FAL#, SYSEN#, PRSNT# signals)
- Signaling level: +3.3V DC or +5V DC
- Data width: 64 bit
- Bus speed: 33MHz
- Hot swap: correspondence
Watchdog Timer:
- Uses Intel® 6300ESB internal TCO timer
- Timeout between 2.4 and 37.8 seconds
PMC Slot:
- Standard: IEEE1386.1
- One slot
- Signaling level 3.3V
- Data bits: 64
- Addresss bits: 32
Front Panel:
- 2x TIA/EIA-232E serial port
- 1x Ethernet 10/100/1000BASE-T using a Intel® RC82545GM™
- UXGA: 1600x1200 high density D-sub 15 male pin connector, Intel® 855GMCH™ internal controller
- 2x USB2.0
Rear I/O:
- 2x USB 2.0
- 2x Serial ATA 1.0
- PMC user I/O (connected to PMC J4 connector, PICMG2.3 R1.0 compliant)
Bus:
- PCI Local Bus Specification Revision 2.2
- PICMG 2.0 R3.0 CompactPCI specification
- PICMG 2.1 R2.0 CompactPCI hot swap specification
RoHS:
Power Supply:
- +5V DC
- +3.3V DC
- When using PMC +12V DC power supply is used
Power Consumption:
- 20W max (+5V DC)
- 3.3V max (+4V DC)
- Backup battery CR2430
Operating Temperature:
Humidity:
Thermal Monitor:
- Can monitor CPU and board temperature at 3 locations
Mechanical:
- Dimensions: 6U – 160 x 233.35 mm (6.30” x 9.19”)
- Pitch: Single slot – 20.02 mm (0.79”)
- Weight: 510g
Operating Systems Supported:
- Windows® 2000™, Windows® XP™