CPU-111-10

Intel Xeon Quad-Core 6U VPX SBC with 10Gig Ethernet Switch

The CPU-111-10 is a rugged, high-performance 6U VPX (VITA 46) Single Board Computer (SBC) featuring a quad-core Intel L5408 Xeon processor and integrated 10 Gigabit Ethernet switch to support full-mesh backplane data layer interconnectivity for up to eight SBCs integrated into a single chassis.

HIGHLIGHTS

• Rugged 6U Single Board Computer compatible with VITA 65 OpenVPX
• 4-Core Intel Xeon L5408 Processor @ 2.13 GHz
• Up to 8x 10 Gigabit Ethernet, 2x 1 Gigabit Ethernet
• Conduction and Convection Cooling Options


APPLICATIONS

• Rugged, High-Performance (Un)manned Vehicle / Aircraft Command and Control (C2) Platforms
• C4ISR Situational Awareness and Sensor Fusion; Civil / Military Mobile Rugged Computing
• Embedded Systems Technology Refresh
• Defense and Homeland Security
General DescriptionFeaturesSpecificationsAccessories
Available in air cooled or conduction cooled formats, the CPU-111-10 conforms to the OpenVPX (VITA 65) payload module profile MOD6-PAY-4F2T-12.2.2.4 with four fat pipes (10 GBase-BX4) and two thin pipes (1000Base-T).

Providing unparalleled data processing capabilities in a single-slot 6U VPX form factor card with built-in 10 Gigabit Ethernet fabric switching, the CPU-111-10 serves as an ideal open-architecture building-block for next-generation Command, Control, Communications, Computers, Intelligence, Surveillance and Reconnaissance (C4ISR) applications onboard (un)manned air / ground vehicles and shipboard platforms. Standard onboard I/O resources includes up to 8x 10 Gigabit Ethernet, 2x 1 Gigabit Ethernet, 4x SATA, 2x USB 2.0, 1x RS-232/485, and 1x VGA video ports. Dual XMC / PMC expansion module sites enable additional I/O expansion, including 10G XAUI lanes from each XMC card to the 10G switched fabric.

Offered in both convection cooled and ruggedized conduction cooled variants, the CPU-111-10 is designed for use with ANSI/VITA 46 1.0” pitch VPX form factor backplanes. Air cooled variants provides a front panel SFP+ port supporting CX4 copper and Fiber applications for chassis-to-chassis and rack-to-rack communications. Conduction cooled variants feature traditional board stiffeners, heat spreaders, and wedge locks to passively transfer heat to the chassis and tolerate high shock and vibration environments. An optional Rear Transition Module (RTM) is available that brings out VPX I/O over industry standard connectors.

An on-board, dual 10 Gigabit Ethernet controller, connected to the internal 10 Gigabit Ethernet Switch supports the IEEE 1588 Precision Time Protocol standard allowing all node boards to be synchronized in the sub-microsecond range.



  Privacy   Legal Notice    P.IVA: IT01791330309 2011 © Eurotech S.p.A.  
19/04/2014 11:25:55
.