An ideal solution for IP networking technology refresh and situational awareness applications, including those seeking a migration path for legacy Cisco 3200 (3230 / 3250 / 3270)-based router subsystems, the DuraMAR 5915 features dual WAN uplinks and is available as either a standalone 5-port network router or with an integrated Gigabit Ethernet switch for a total of 19 Ethernet ports.
Optimized for Size, Weight and Power (SWaP) sensitivity as well as mechanical robustness under extreme environmental conditions and fully certified to MIL-STD-810G (thermal, shock, vibration, humidity, exposure to dust, water), the DuraMAR 5915 enables prime contractors and civilian agencies to deploy Cisco Mobile Ready Net capabilities, including data, video, and voice services virtually anywhere LAN or WAN connectivity may be required, especially in mobile, airborne, ground, manned or unmanned vehicle applications.
Leveraging stackable PC104 subassemblies and a modular enclosure design, the unit is completely sealed, requires no active cooling, provides interfaces over MIL-C-38999 style connectors, and features a military-grade power supply supporting aircraft (MIL-STD-704F) and ground/marine (MIL-STD-1275D) vehicle voltage inputs, spikes, and transient levels, as well as MIL-STD-461F EMI/EMC filtering.
With software built upon the Cisco 3270 IOS architecture, the DuraMAR 5915 delivers the performance, security, advanced Quality of Service (QoS), high availability, and manageability that customers expect from Enterprise IOS-based routing technology. The unit supports extensive IPv4 and IPv6 routing protocols, IP multicasting, Radio Aware Routing (RAR), Dynamic Link Exchange Protocol (DLEP) and Mobile IP routing for transparent connectivity to a roaming vehicle network in Comms on the Move (COTM) applications. An onboard AES hardware encryption engine offloads encryption processing from the router to provide highly secure yet scalable data, video, and voice services.
Cisco Technology
Ruggedized Cisco 5915 Router with Enterprise IOS Software for Robust Security, Management, QoS, VLAN, IPv4 / IPv6 Routing, IP Mobility, Interoperability
Integrated Services Router (ISR) Features Support Concurrent Data, Video, and Voice Services, as well as Firewall and Hardware AES Encryption Acceleration
Modular, Open Architecture Rugged COTS PC104 Hardware Design
Integrated Parvus Gigabit Ethernet Switch Option to Scale Port Density to 19 Ethernet Ports for Higher Port Density Application Requirements
Scalability
Standalone Router: 5 Ethernet Ports (3x 10/100 Switched, 2x 10/100 Routed)
Router+Switch: 19 Ethernet Ports (15 GigE Switched, 2x 10/100 Switched, 2x 10/100 Routed)
Ruggedization
Fully Qualified to MIL-810G Shock, Vibration, Thermal, Altitude, Humidity
-40 to +71ฐC Fanless Extended Temp Operation with No Moving Parts
Corrosion-Resistant, Aluminum Chassis Sealed Against Water, Dust, EMI
Circular MIL-DTL-38999 Connectors for Reliable Network Connections
Filtered, Transient-Protected Power Supply for Aircraft and Vehicle Use
Qual Tested for MIL-461F Conducted/Radiated Emissions & Susceptibility
Data Zeroization Support to Erase Sensitive Information
Conformal Coating for Humidity/Tin-Whisker Mitigation
Flexible / Robust Mounting Base Flange Mount or Side Boss Mount
Cisco Technology
Integrated Cisco 5915 Embedded Services Router (ESR) PCI-104 Card
Cisco Enterprise IOS - Base Image or Advanced Services Image
Support for IPv6 Routing, VoIP / CME, VPN / Firewall / IPS, Mobile IP, IPSec Exclusive to Advanced IOS only (for complete IOS feature set comparison, refer to Cisco Feature Navigator for 3270 IOS 12.4 (24)T3 at Cisco.com)
Ports
Standalone Router:
2x 10/100Mbps Fast Ethernet WAN Router Ports, IEEE 802.3 Compliant
3x 10/100Mbps Fast Ethernet Switched LAN Ports, IEEE 802.3u Compliant
1x Console Port, RS-232
Router + Integrated GigE Switch:
2x 10/100Mbps Fast Ethernet WAN Router Ports, IEEE 802.3 Compliant
2x 10/100Mbps Fast Ethernet Switched LAN Ports, IEEE 802.3u Compliant
15x 10/100/1000Mbps Gigabit Ethernet Switched LAN Ports, IEEE 802.3ab Compliant (2x PC104+ COM-1268 cards)
2x Console Ports, RS-232 (1x for Router, 1x for GigE Switch)
Management & Monitoring
Base/Advanced Enterprise Cisco IOS Software with Command Line Interface (CLI)
Configuration Management via Serial Console or Ethernet Port Through Terminal Emulation Application
SNMPv2/v3, Telnet, RADIUS, TACACS+, Cisco Service Assurance Agent, Syslog, Response Time Reporter, NTP Client, TFTP Client and Server, DHCP Client and Server, DHCP Relay, HSRP
Network Address Translation; Address Conservation; DHCP Client Address Negotiation, Easy IP Phase I
Voice Support
Cisco Unified Comms Manager Express for Remote IP Telephony/Command & Control Comms, 5 / 25-User License Support (Advanced IOS Add-On Option)
Routing / Bridging (partial list)
IPv4 and IPv6 Routing (IPv6 Features Available in Advanced Enterprise IOS Image only)
Routing Protocol Support: RIPv1v2; OSPF; EIGRP-IP; Cisco Discovery Protocol, Cisco GMP; IP Multicast PIM v1, PIMv2; Protocol Independent Multicast -Sparse Mode (PIM-SM); IGMPv1v2; IP Policy Routing, IP Multicast Load Splitting; Point-To-Point Protocol (PPP), Frame Relay, X.25, XOT, High-Level Data Link Control (HDLC), Telnet, Dial-On-Demand Routing (DDR), PPP Over Frame Relay, UDP Telnet
VLAN: Virtual Local Area Network Logical Segmentation of Network for Optimal use of Bandwidth
Radio Aware Routing (RAR) RFC 5578 OSPFv3/EIGRP w/ Mobile Ad-Hoc Networks(MANET) Extensions (PPPoE)
Mobile IP Routing and Cisco Mobile Network Support (Advanced Enterprise IOS Only)
Security
Authentication: Route, PAP, CHAP, MS-CHAP Local Password, IP Access Lists, Time-Based Access Control Lists
Generic Routing Encapsulation (GRE); Fast Switching, Cisco Express Forwarding, Process Switching, STAC Compression, RTP Header Compression
Advanced Enterprise IOS Only: Stateful Inspection Firewall; Intrusion Detection System ; Easy VPN for Client/Server/Remote; MPLS VPN; Hardware Accelerated Crypto: IPSec, 3DES, AES, IKE Protocols; Port-To-Application Mapping; Tunnel Endpoint Discovery; Secure Shell (SSH) Protocol Client and Server
Information Assurance
Data Zeorization Support to Erase Sensitive Information (Initiated by Offboard Signal Trigger) Advanced IOS only
Common Criteria Evaluation and Validation Scheme (CCEVS) EAL and Federal Information Processing Standard (FIPS) 140-2 Certification Pending on Cisco 5915 Router Card (Building on Legacy Cisco 3200 EAL3 Certification)
QoS
Quality of Service (QoS) Classification / Prioritization of Data, Guaranteeing Determinism for Mission-Critical Data:
Generic Traffic Shaping, Class-Based Ethernet Matching, Mobile Access Routing (802.1p Class of Service), Committed Access Rate, Flow-Based WRED, Low-Latency/Priority/Weighted Fair Queuing, Dial Backup, Dialer Profiles, Dialer Idle Timeout, Dial on Demand, Class-Based Weighted Fair Queuing, Traffic Policing RSVP
802.1Q Virtual Local-Area Network (VLAN) Trunking and Encapsulation support
Status Indication
LED Indicators for PWR and LNK
Power
24 / 28 VDC Voltage Input Range: 18-33 VDC
Power Consumption: <15W Max (Standalone Router) / <50 W Max (Router w/GigE Switch)
Designed to Comply with MIL-STD-704F and MIL-STD-1275D Steady State Voltage, Ripple, Surges, and Spikes
Galvanic Isolation: 1500 V
Reliability
MTBF: TBD Calculated per MIL-HDBK-217F
Industrial-Grade Components; No Moving Parts; Passive Cooling; Conformal Coated Boards
Warranty
Standard 90-Day Return to Depot Warranty; Multi-Year Extended Service Agreements Bundling Cisco SmartNET Available (for Access to IOS Software Upgrades/Updates)
Options
Starter Breakout Cable Sets from MIL-38999 to RJ-45/DB-9 for Lab Use
Integrated PC/104 Single Board Computer / Other I/O Cards (Contact us)
Physical Characteristics
Dimensions (Approx): Standalone Router - 2.66 H x 6.75" D x 6.25 W (~6.76 cm H x ~17.15 cm D x ~15.88 cm W); Router/Switch Combo - 4.66 H x 6.75" D x 6.25 W (~11.84 cm H x ~17.15 cm D x ~15.88 cm W), Excluding Connectors/Mounts
Weight: <5.0 lbs. (<2.27 kg) Standalone Router; <10 lbs (<4.54 kg) Router w/ Integrated Switch
Installation: Base Flange Mount or Side Boss Mount (90ฐ Rotated Orientation)
Connectors: MIL-DTL-38999 Series III
Cooling: Passive Conductive. No Moving Parts
Enclosure/Finish: Corrosion Resistant, Aluminium Alloy w/ Black Anodize Finish per MIL-A-8625, Type II, Class 2
Environmental
Qualification Tested /Certified to MIL-STD-810G:
Operating Temperature: -40ฐ to +71ฐC / -40ฐ to +160ฐF (MIL-810G, Methods 501,502)
Storage Temperature: -40ฐ to +85ฐC / -40ฐ to 185ฐF (MIL-810G, Methods 501,502)
Operating Shock: 40g, 11ms, 3 pos/neg per axis, 18 terminal peak sawtooth pulses (MIL-810G, Method 516)
Crash Hazard Shock: 75g, 11ms, 2 pos/neg per axis, 12 terminal peak sawtooth pulses (MIL-810G, Method 516)
Random Vibration: 10Hz to 2000Hz, 3 Axes, 1 Hour/Axis (MIL-STD-810G, Method 514)
Humidity: Up to 95% RH @ 40C, Non-Condensing (Conformal Coated PWBs - Qual by Analysis)
Water Immersion: 1 Meter, 30 Minutes (MIL-STD-810G, Method 512)
Blowing Sand and Dust per MIL-STD-810G, Method 501.5 (Sealed Enclosure; Qual by analysis)
Operational Altitude: Up to 15,000 feet (4,572 meters) - MIL-STD-810G, Method 500
Storage Altitude: Up to 40,000 feet (12,192 meters) - MIL-STD-810G, Method 500
EMI / EMC
Qualification Tested / Certified to MIL-STD-461F:
Conducted Emissions, CE102, Power Leads, 10 KHz to 10MHz, basic curve
Conducted Susceptibility, CS101, Power Leads, 30 Hz to 150 KHz, Curve 2 (28V and Below)
Radiated Emissions, RE102, Electric Field, 10 KHz to 18 GHz, Figure RE102-3
Radiated Susceptibility, RS103, Electric Field, 2MHz to 18 GHz, Aircraft External, 200 Volts per Meter