Advme7509 is a single-slot 6U VME board utilizing a PowerPC 750FX™ processor. The board can be used as a system controller to meet high performance system requirements. The front panel includes 2ch of 10/100BASE-TX Ethernet ports and 4ch RS232 serial ports.
VME controller
The external VME bus is accessible via the on-board NARUTO II™ PCI-VME bridge.
Main Memory
There is a variety of memories that are available including: SDRAM (up to 512MB), CompactFlash, FlashROM, SRAM, and EEPROM.
Architecture:
CPU:
- IBM® PowerPC 750FX™ (600MHz)
- L1 cache:32KB/32KB, L2 cache:512KB w/ parity
Memory:
- 256-512MB SDRAM (133MHz supports EC/ECC functions)
- 512KB Boot ROM Flash Memory (accommodating Advanet’s T4th boot loader)
- 512KB SRAM for backup
- 256 Bytes Serial EEPROM
- CompactFlash socket supporting 3.3V modules
- 8-ch DMA controller
System Controller:
- Marvell Discovery I (GT-64260)
PCI-VME Bridge:
PMC Slot:
- Standard: IEEE 1386.1
- One slot
- Power supply +5V, +3.3V, +12V, -12V DC
- 32/64 bit
Watchdog Timer:
Real Time Clock:
- EPSON® RTC62423™
- Battery backup
Other Interfaces:
- 4x RS232C (using RJ-45 connector)
- 2x 10/100Base-T Ethernet (RJ-45)
Bus:
- VME bus
- Width complies with A32/A24/A16 D32/D16/D08 (EO) Rev.C.3
- Functions: master/slave, system controller, interrupter, interrupt handler, system reset, input/output
RoHS:
Power Supply:
Power Consumption:
- 32.5W max (excluding PMC)
Mechanical:
- Dimensions: 6U - 160 x 233.35 mm (6.30” x 9.19”)
- Pitch: Single slot - 20.02 mm (0.79”)
- Weight: 330g
Operating Temperature:
Humidity: