The CPU-301-16 is available in two versions: as a stand-alone Single Board Computer (no need for a carrier board: just add a power source, the cables and an enclosure to make a smart device) and as a traditional Computer on Module, where the native interfaces are exposed and expanded through a carrier board.
The board support package (BSP) from Eurotech enables the capabilities of the i.MX6 processor, providing an application-ready embedded platform that makes it easy to exploit the full feature set of the module.
The CPU-301-16 extends the Eurotech family of products that make Machine-to-Machine applications possible. With the Everyware Software Framework (ESF) or the Everyware Cloud Client loaded on the CPU-301-16, any device using this platform is Everyware Cloud-enabled and ready to be part of the Internet of Things.
To learn how the CPU-301-16 can speed time to market and simplify development for sophisticated devices, contact the Eurotech sales team to order a development kit.
Flexible Use The CPU-301-16 is available in two versions: as Computer on Module (COM) to be coupled to a carrier board and as a stand-alone Single Board Computer (SBC).
Multi-Core Options The CPU-301-16 offers configurations using single core, dual core or quad core technology to give device manufacturers just the right amount of processing power for their application.
Ultra Low Power Consumption Thanks to Eurotechs proprietary power management, the CPU-301-16 can typically operate below 1W making it ideal for battery-operated devices and power-constrained uses.
HD Multimedia Playback For applications like kiosk, digital signage, and point of sale, the CPU-301-16 can run up to four independent displays at 1080p.
Rugged and Efficient Design With optional support for industrial temperature range and enhanced vibration tolerance, at 67mmx85mm the CPU-301-16 fits into very small enclosures, with little or no need for heat dissipation in low power configurations.
Long Life-Cycle With support for extended lifecycle, any design using the CPU-301-16 will have proven supply and support for many years to come.
PROCESSOR
Freescale i.MX6 Solo (Single Core ARM Cortex-A9, up to 1.0 GHz)
Freescale i.MX6DualLite (Dual Core ARM Cortex-A9, up to 1.0GHz)
Freescale i.MX6Dual (Dual Core ARM Cortex-A9, up to 1.2GHz)
Freescale i.MX6Quad (Quad Core ARM Cortex-A9, up to 1.2GHz)
MEMORY
Main Memory: DDR3L, memory down, up to 4GB
On Board Flash: Memory down, up to 64GB
On Board Flash Expansion: microSD slot, up to 64GB
Off Board Flash Expansion: 8bit SD port
BOOT OPTIONS
Boot Support: SD, NAND, eMMC, USB
STAND ALONE SBC MODE INTERFACES
Graphics/Audio: 1x HDMI
USB: 1x USB 2.0, OTG
Ethernet: 1x Gb Ethernet, with integrated PHY
Serial: 1x RS232 (2 wire)
GPIO: 5x GPIO, 3.3V
I2C: 1x I2C bus
Power Supply Single: 3.3V input
Connector Type: Direct Board to Wire (no carrier board required)
CoM MODE INTERFACES
Graphics: 2x LVDS, 1x RGB, HDMI, MIPI
Audio CODEC Interface: S/PDIF
SATA: 1x SATA-300
USB: 2x USB 2.0 (1x Host, 1x OTG)
Serial: 4x UART
Expansion/Flash Port: 1x SD interface, 8 bit
Ethernet: 1x 10/100/1000 with integrated PHY, IEEE1588 Support
CAN: 2x CAN 2.0
PCIe: x1 PCIe
Camera Interfaces:
- MIPI Camera
- CMOS Camera (Optional)
GPIO:
- 21x GPIO, 3.3V (with support for an 8x8 keyboard matrix)
I2C: 2x I2C bus
SPI: 2x SPI bus
OPERATING SYSTEM
Linux and Windows Embedded Compact 7
Physical Characteristics
PHYSICAL
Dimensions: 67mm x 85mm
CoM Connector: 2x Tyco Series, 220 Pin
ENVIRONMENTAL
Operation temp.:
- Extended -40 to +85°C
- Commercial 0 to 70°C
RoHS: Compliant
POWER
Power Supply:
- 3.3V input
- <1W for many applications
- 5 Watt Max
Power Management:
- Eurotech Power Management
- Sleep/Run/Selective Power Down/Scaling